The diagnostic trouble code (DTC) P0705 in your vehicle’s computer means that the sensor (Range Switch) that monitors what gear the transmission is in has experienced a fault and set a code in the Engine Control Module (ECM). Need a replacement transmission? Get an estimate for replacement transmissions and local installation. P0705 is a diagnostic trouble code (DTC) for 'Transmission Range Sensor Circuit Malfunction (PRNDL Input)'. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.

Fix code P0705 Transaxle range switch circuit malfunction (PRND321)

A monitoring switch is attached to the transmission where the shift cable attaches. This switch tells the computer what gear you selected. If the switch is out of adjustment, you will get

P0705 Toyota

P0705 Transaxle range switch circuit malfunction (PRND321)

Here’s how to adjust the switch to get the codes to go away Sophos xg105w.

1) set the parking brake
2 Remove the air filter box assembly so you can access the transmission range switch.
3) Turn the key to the ON position, but do not start the vehicle. Move the shifter to the neutral position.
4) Align the alignment holes between the switch and the shift lever. Insert a 5mm drill bit into the adjustment hole to verify the proper alignment for the neutral position.
5) If the bit won’t fit, the switch is out of alignment. Loosen the bolts and move the switch until you can insert the drill bit. Tighten the bolts to 96 INCH/lbs.

© 2012 Rick Muscoplat X plore apk pro.

P0705 Toyota Transmission Range Sensor

P0705 Nissan

Posted on by Rick Muscoplat

P0705 Ford